As an Amazon Associate I earn from qualifying purchases.
Sodcay #ad - The carbon fiber shark fins can even be removed without damaging your vehicles paint job. The size is 80mm x 40mm x 23mm/3. 1in x 1. 57in x 09in. Hight quality: made of high quality abs meterial, fine workmanship, durable, dustproof, anti-scratch and anti-corrosion.
Fits for most cars, windshield, bumper etc. Package includes: you will get 10 x shark fins antenna. Easy to install: self-adhesive installation, not easy to fall off. Durable and wear-resistant. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
When you find scratch on this antenna cover due to transportation, stick the antenna fin on the surface. Super light weight and strong construction. Function: high performance, suvs, trucks, spoiler, reduce air resistance and air noise, directly tape on roof top, improve the stability of the vehicle during fast driving. Fashionable & practical: stylish shark fin design, smooth and shinny surface give your car aggressive unique look and makes it stand out.
GKmow #ad - Cooler and sportier than the original car, the unique stream lined shark fin design make it more beautiful for your vehicle. Enhance the grade and reduce wind resistance. Please allow 05-1cm deviation due to manual measurement. Easy to install: self-adhesive installation, no drilling required, stick the antenna fin on the surface.
Waterproof, sturdy and fall-proof. Strong paste, just clean and dry your car, not easy to fall off, which is easy to install and does not hurt the car.
Durable material: the car topper antenna covers are all made of high-quality ABS plastic material with professional-grade paint treatment, dustproof, sunproof, the shark fin antenna is solid and durable, with a built-in pure copper antenna and chip. Not only for the signal function, the signal is stable and strong. Size detail: this shark fin antenna size is 16cm*7. 8cm*7cm/6. 29inch*3inch*2.
GKmow #ad - Strong self-adhesive on the car, keep adhering in harsh conditions. Easy to install: use of bottom adhesive directly stick, need proper measurement to get them perfectly aligned.
When installing, use a hair dryer to heat it for 1 minute for better viscosity. Drag reduction noise reduction: streamlined design reduces air resistance and air noise, improving vehicle stability at fast speeds. Exterior decoration: fashionable EVO style, carbon fiber texture smooth and shiny surface, cool and distinctive appearance makes your car stand out.
gunhunt #ad - Wide application: this universal shark fin antenna is suitable for most car on the market. The unique stream lined shark fin design make it more beautiful for your vehicle. Easy to install: self-adhesive installation, no drilling required, stick the antenna fin on the surface, just clean and dry your car, the back of the product is equipped with double-sided tape, not easy to fall off.
High quality: the car antenna shark fin is made of high quality paint technology.
Waterproof, sturdy and drop-proof. Bright color, anti-exposure, dustproof, not easy to fad. In order to ensure normal installation and use after purchase, please check the size of your car's antenna base before placing an order.
NGHEY #ad - Not only is it functional, no drilling required, stick the antenna fin on the surface. Waterproof, sturdy and drop-proof. Bright color, dustproof, anti-exposure, not easy to fad. This shark fin antenna is designed with unique stream lined shark fin, achieve the purpose of decoration, let your car more brilliant.
Easy to install: self-adhesive installation, not easy to fall off. Best replacement: it can replace your car's original antenna, it is a perfect replacement.
Widely use: fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. High quality: the car antenna shark fin is made of high quality ABS. The unique stream lined shark fin design make it more beautiful for your vehicle. Please allow 05-1 cm deviation due to manual measurement. Dimensions: you will receive a car roof decorative antenna measuring 6. 69"/170 mm x 2. 63"/67 mm x 2.
Dewkou #ad - Reduce air resistance and air noise, improve the stability of the vehicle during fast driving. Size is 3. 14 x 015 x 090 inches. Carefully place the product on a precise position, and press down to ensure good adhesion.
4. High quality: made of abs. The charm is upgraded, and the grade is higher, harmonious matching, the taste is upgraded, highlighting the demeanor of a high-end luxury car. Abs plastic raw material resin is a thermoplastic polymer material structure with high strength, low weight, good toughness and easy processing and molding.
2. Package: 10 pieces shark fin diffuser. Design: noise reduction design, combined with aerodynamic and aesthetic principles, can effectively reduce airflow noise and make driving quieter. 5. Suitable for: universal for most cars, SUVs on roof top, trucks, windshield, spoiler, bumper etc. Do not wash the car within 24 hours, remove the protective film, keep it can have adhesive strength.
cueclue #ad - This universal shark fin antenna measures 6. 77" x 3. 03" x 2. 55". Widely applicable: you will get 1 pc shark fin antenna. Enhanced signal: the shark fin antenna has a built-in pure copper antenna and chip, which can better accept AM/FM signals, and the signal is stable and strong.
Fit for most cars having a slightly curved or flat roof surface. This is a great decoration. It is designed with unique stream lined shark fin, let your car more brilliant.
Easy to install: no drilling is required, stick the antenna fin on the surface, self-adhesive installation, the back of the product is equipped with double-sided tape, just clean and dry your car, which is easy to install and does not hurt the car. Cooler and sportier than the original car.
QODOLSI #ad - Using a curved bottom, you can also make the external decoration of the car. There are two colors of black and carbon fiber black to choose from. Function: this product can be connected to the original car radio antenna.
The bottom arc size is 3. 9 inches x 2. 4 inches. Easy to install: first remove the shark fin, twist it with screws, then remove the antenna, and put the powerful double-sided glue to the back of the shark fin when the double-sided glue is not easy to tear off, you can use a fine-tip object to open it, tear off the double-sided glue.
High-quality material: this car shark fin antenna is made of ABS plastic. Install the shark fin, and squeeze it hard after aligning. Suitable for most cars. The radio effect is very good. The unique streamlined shark fin design makes your car more fashionable. Universal fitting: the product size is 6. 7 inches x 3 inches x 2. 5 inches. It is connected to the thick pure copper wire.
Ajxn #ad - Widely used: 10pcs shark fin antennas are universal for most cars, good curves fit original appearance, no modification or trimming required. High quality material: made of good-quality ABS plastic, UV protected and weatherproof, these shark fin spoiler designed to increase a vehicle's aerodynamic performance.
Easy to install: use of bottom adhesive directly stick, need proper measurement to get them perfectly aligned.
AICEL #ad - Good quality: made of high-quality abs material, there are four colors for you to choose. Elegant surface and exquisite workmanship make your vehicle look beautiful and stylish. Universal fit: the package contains 4 rear diffuser spoilers and is universally suitable for most vehicles.
Elegant surface: there are four colors for you to choose, carbon fiber. The product size is 4. 9x2. 6 inches, please confirm the size before purchasing to make sure it is more suitable for your vehicle. There are four splitters, red edge black cover, red cover, matching screws and strong double-sided tape in the package.
If you have any questions about our products, please contact us directly! We will help you solve the problem and will always do our best to meet your needs. This unique design makes your car look more aesthetically pleasing, more racing-like and stand out from other vehicles. It is a product that is both practical and aesthetically pleasing. You can do it independently. The installation process won't take you much time.
1. Sodcay
#adTailpiece Car Antenna, ABS Plastic Roof Decoration Spoiler Wing, Sodcay Pack of 10 Diffuser Shark Fin Kit, Fit for Most Car Carbon Fiber Black
#adFits for most cars, windshield, bumper etc. Package includes: you will get 10 x shark fins antenna. Easy to install: self-adhesive installation, not easy to fall off. Durable and wear-resistant. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
More information #ad
Strong paste, just clean and dry your car, no drilling required, please wipe gently with a wet towel. When you find scratch on this antenna cover due to transportation, stick the antenna fin on the surface. Super light weight and strong construction. Function: high performance, suvs, trucks, spoiler, reduce air resistance and air noise, directly tape on roof top, improve the stability of the vehicle during fast driving. Fashionable & practical: stylish shark fin design, smooth and shinny surface give your car aggressive unique look and makes it stand out.
| Brand | Sodcay #ad |
| Manufacturer | Sodcay #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | SO25 |
| Model | SOSYQ101CB-10PC |
| Warranty | Manufacturer warranty for 30 days from date of purchase |
More information #ad
2. GKmow
#adReplacement Car Roof Decorative Antenna Cap, GKmow 1 PC Car Shark Fin Antenna Cover, AM FM Radio Signal Roof Aerial Adhesive Tape Base, for Car SUV Truck Carbon Fiber Black
#adWaterproof, sturdy and fall-proof. Strong paste, just clean and dry your car, not easy to fall off, which is easy to install and does not hurt the car.
More information #ad
Fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. Special design: car shark fin shaped antenna covers are with AM/FM radio signal. Fashionable decoration: the antenna topper cover is more beautiful and fashionable, and immediately improves the grade of your car. Durable material: the car topper antenna covers are all made of high-quality ABS plastic material with professional-grade paint treatment, dustproof, sunproof, the shark fin antenna is solid and durable, with a built-in pure copper antenna and chip. Not only for the signal function, the signal is stable and strong. Size detail: this shark fin antenna size is 16cm*7. 8cm*7cm/6. 29inch*3inch*2.
| Brand | GKmow #ad |
| Manufacturer | GKmow #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | GK26 |
| Model | GKSYQ03CB |
| Warranty | Manufacturer warranty for 30 days from date of purchase |
More information #ad
3. GKmow
#adUniversal Rear Bumper Canards Splitter, Stick-on Spoiler Roof Air Vortex Decorative Aerial Black #100, GKmow Pack-10 Car Shark Fin Antenna Kit
#adWhen installing, use a hair dryer to heat it for 1 minute for better viscosity. Drag reduction noise reduction: streamlined design reduces air resistance and air noise, improving vehicle stability at fast speeds. Exterior decoration: fashionable EVO style, carbon fiber texture smooth and shiny surface, cool and distinctive appearance makes your car stand out.
More information #ad
It can bring you a good driving experience. High quality material: the made of high quality ABS material, strong and not easy to fall off, durable. Package content: you will receive 10 shark fin antennas, suitable for most cars, good curve, you can choose the color you like, no need to trim.| Brand | GKmow #ad |
| Manufacturer | GKmow #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | GK25 |
| Model | GKSYQ100BL-10PC |
| Warranty | Manufacturer warranty for 30 days from date of purchase. |
More information #ad
4. gunhunt
#adSuper Functional for Car SUV Truck Van Most Auto Cars Carbon Fiber Black, gunhunt 1 PC Shark Antenna Fin Roof Aerial Base Radio Signal with Adhesive Tape Base
#adHigh quality: the car antenna shark fin is made of high quality paint technology.
More information #ad
Size detail: the size of your antenna's base is 17cm*7. 5cm*6cm/6. 69*2. 95*2. 36 inches. Fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. Enhanced signal: the shark fin antenna has built-in pure copper antenna and chip, as the signal amplifier, this shark fin antenna can enhance the vehicle's signal with FM/AM connection cable inside while driving. Waterproof, sturdy and drop-proof. Bright color, anti-exposure, dustproof, not easy to fad. In order to ensure normal installation and use after purchase, please check the size of your car's antenna base before placing an order.
| Brand | gunhunt #ad |
| Manufacturer | gunhunt #ad |
| Part Number | GU25 |
| Model | GUSYQ03CB |
| Warranty | Manufacturer warranty for 30 days from date of purchase |
More information #ad
5. NGHEY
#adShark Fin Signal Antenna, NGHEY Pack-1 Car Radio Antenna, Car Decorative Top Mounted Dummy Roof Aerial for Most Cars SUVs and Trucks Bright Black
#adEasy to install: self-adhesive installation, not easy to fall off. Best replacement: it can replace your car's original antenna, it is a perfect replacement.
More information #ad
When you find scratch on this antenna cover due to transportation, please wipe gently with a wet towel. Strong paste, just clean and dry your car, it's also a cool addition to your car's exterior. Widely use: fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. High quality: the car antenna shark fin is made of high quality ABS. The unique stream lined shark fin design make it more beautiful for your vehicle. Please allow 05-1 cm deviation due to manual measurement. Dimensions: you will receive a car roof decorative antenna measuring 6. 69"/170 mm x 2. 63"/67 mm x 2.
| Brand | NGHEY #ad |
| Manufacturer | NGHEY #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | NG25 |
| Model | NGSYQ1200BL-1PC |
| Warranty | Manufacturer warranty for 30 days from date of purchase. |
More information #ad
6. Dewkou
#adEVO Style Shark Fin Antenna, Rear Roof Spoiler, Antenna Fashion Decoration Black, Shark Fin Spoiler Diffuser, Dewkou 10 Pack Diffuser, Car Roof Modification
#ad4. High quality: made of abs. The charm is upgraded, and the grade is higher, harmonious matching, the taste is upgraded, highlighting the demeanor of a high-end luxury car. Abs plastic raw material resin is a thermoplastic polymer material structure with high strength, low weight, good toughness and easy processing and molding.
More information #ad
Clean the surface of the installation locatio. 3. Feature: unique shape, full of style, make your car more perfect. 2. Package: 10 pieces shark fin diffuser. Design: noise reduction design, combined with aerodynamic and aesthetic principles, can effectively reduce airflow noise and make driving quieter. 5. Suitable for: universal for most cars, SUVs on roof top, trucks, windshield, spoiler, bumper etc. Do not wash the car within 24 hours, remove the protective film, keep it can have adhesive strength.
| Brand | Dewkou #ad |
| Manufacturer | Dewkou #ad |
| Part Number | DW25 |
| Model | DWSYQ101BL-10PC |
| Warranty | Manufacturer warranty for 30 days from date of purchase |
More information #ad
7. cueclue
#adCueclue Pack-1 Shark Fin Antenna Equipped with Adhesive Tape, Applicable to Most Car SUV Trucks and Minivans Carbon Fiber Black, AM/FM Radio Signal Roof Antenna
#adFit for most cars having a slightly curved or flat roof surface. This is a great decoration. It is designed with unique stream lined shark fin, let your car more brilliant.
More information #ad
High quality material: this shark fin antenna uses sturdy ABS material, achieve the purpose of decoration, solid and durable. Fashionable decoration: the streamlined shark fin shape design can replace the original long antenna, which is more beautiful and fashionable, and immediately improves the grade of your car. Easy to install: no drilling is required, stick the antenna fin on the surface, self-adhesive installation, the back of the product is equipped with double-sided tape, just clean and dry your car, which is easy to install and does not hurt the car. Cooler and sportier than the original car.
| Brand | cueclue #ad |
| Manufacturer | cueclue #ad |
| Height | 0.04 Inches |
| Length | 0.04 Inches |
| Width | 0.04 Inches |
| Part Number | CC25 |
| Model | CCSYQ01CB-1PCS |
| Warranty | Manufacturer warranty for 30 days from date of purchase. |
More information #ad
8. QODOLSI
#adEnhance Car Antennas, Roof Antenna Seat, Universal Car Antenna Decoration Carbon Fiber Black, No Punching Antenna Hood, Roof Rear Wing Modified Car Radio Signal, QODOLSI 1 PC Car Shark Fin Antenna
#adThe bottom arc size is 3. 9 inches x 2. 4 inches. Easy to install: first remove the shark fin, twist it with screws, then remove the antenna, and put the powerful double-sided glue to the back of the shark fin when the double-sided glue is not easy to tear off, you can use a fine-tip object to open it, tear off the double-sided glue.
More information #ad
The product connection is bold copper line, which are hand-connected, and the signal is more stable. High-quality material: this car shark fin antenna is made of ABS plastic. Install the shark fin, and squeeze it hard after aligning. Suitable for most cars. The radio effect is very good. The unique streamlined shark fin design makes your car more fashionable. Universal fitting: the product size is 6. 7 inches x 3 inches x 2. 5 inches. It is connected to the thick pure copper wire.
| Brand | QODOLSI #ad |
| Manufacturer | QODOLSI #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | QO2547 |
| Model | QOSYQ01CB-1PCS |
| Warranty | Manufacturer warranty for 30 days from date of purchase |
More information #ad
9. Ajxn
#adStick-on Spoiler Roof Air Vortex Aerial Decorative, for Car Truck SUV Carbon Fiber Black #101, Rear Bumper Splitter, Ajxn 10 PCS Car Shark Fin Auto Antenna Kit
#adEasy to install: use of bottom adhesive directly stick, need proper measurement to get them perfectly aligned.
More information #ad
When installing, use a hair dryer to heat it for 1 minute for better viscosity. Drag reduction noise reduction: Streamlined design reduces air resistance and air noise, improving vehicle stability at fast speeds. Exterior decoration: fashionable EVO style, carbon fiber texture smooth and shiny surface, cool and distinctive appearance makes your car stand out.| Brand | Ajxn #ad |
| Manufacturer | Ajxn #ad |
| Part Number | AJSYQ10-0508 |
| Model | AJSYQ101CB-10PC |
| Warranty | Manufacturer warranty for 30 days from date of purchase. |
More information #ad
10. AICEL
#ad4pcs Car Rear Lower Bumper Wing Lip Diffuser, Rear Bumper Splitter Lip Wing with Screw, Universal Auto Decoration for Car SUV Truck, Anti-Crash Accessories Spoiler Shark Fin Protector
#adElegant surface: there are four colors for you to choose, carbon fiber. The product size is 4. 9x2. 6 inches, please confirm the size before purchasing to make sure it is more suitable for your vehicle. There are four splitters, red edge black cover, red cover, matching screws and strong double-sided tape in the package.
More information #ad
In that way no matter how fast you drive or how bad the road condition is, fix the diverter to the rear bumper with double-sided tape, it won't fall off easily. It is lightweight, scratch-resistant, waterproof, not easy to deform, it is durable, not easy to rust, and has a long service life. If you have any questions about our products, please contact us directly! We will help you solve the problem and will always do our best to meet your needs. This unique design makes your car look more aesthetically pleasing, more racing-like and stand out from other vehicles. It is a product that is both practical and aesthetically pleasing. You can do it independently. The installation process won't take you much time.
| Brand | AICEL #ad |
| Manufacturer | AICEL #ad |
| Height | 0.5 Inches |
| Length | 1 Inches |
| Weight | 0.02 Pounds |
| Width | 1 Inches |
| Part Number | FBC12240D |
| Model | Wing Lip Diffuser |
| Warranty | 0.2 |
More information #ad
