Top 9 Co2 Regulator Y Splitter – Beer Brewing Kegs & Kegging

As an Amazon Associate I earn from qualifying purchases.

1. Kegco

#ad

Chrome, Kegco LH BF13R06 Co2 Regulator Y Splitter

#ad
Kegco #ad - This item is a co2 regulator Y Splitter - Chrome Plated. This fitting allows you to convert a single output regulator into a dual output regulator. Manufactured in China. Home brew Kits and accessories. All that you need is this "Y" fitting, an additional shutoff fitting, and nylon tape.
BrandKegco #ad
ManufacturerKegco #ad
Height2 Inches
Length2 Inches
Weight0.4 Pounds
Width2 Inches
Part NumberBF13R06
ModelLH BF13R06

2. Bev Rite

#ad

Bev Rite Brass CO2 Gas Regulator Y Fitting Splitter Distributor

#ad
Bev Rite #ad - Reuse one existing shutoff from the regulator to complete the setup. For use with an existing regulator to run two beer lines from a single regulator. Is assembly Required: false. You'll need an additional shutoff and Teflon tape to convert your regulator to two outputs.
BrandBev Rite #ad
ManufacturerBev Rite #ad
Height1 Inches
Length2 Inches
Width1 Inches
Part NumberCPG112
ModelCPG112

3. Kegco

#ad

Kegco Elite Series Dual Gauge CO2 Draft Beer Regulator, 2 Product

#ad
Kegco #ad - This regulator's two product design with two 5/16" barbs allows you to simultaneously dispense two beer kegs at the same pressure. Large ergonomic handle makes it easy to make precise pressure adjustments between 0-60 PSI for greater dispensing control.

Stylish black pressure gauges feature high-contrast red and white writing and sturdy rubber boots that help protect them from damage. Dual pressure gauges allow you to monitor both the output pressure to the kegs and the volume of CO2 gas remaining in the cylinder. Durable chrome-plated brass body features a manual pressure release valve and an internal pressure relief valve that releases at 55-65 PSI.
BrandKegco #ad
ManufacturerKegco #ad
Height5 Inches
Length8 Inches
Weight3.97 Pounds
Width9 Inches
Part NumberLHU52-2
ModelLHU52-2

4. Silkyway

#ad

2 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

#ad
Silkyway #ad - Made of prime aluminum, which is extremely durable. Designed with a 2-point screw hole on the top for easy installation to other equipment. Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi.

You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg. Gas manifold, machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow. Chrome plated valves with spring loaded Ball check valve. Each line has its own shutoff valve.

5/16" threaded ports barbed inlet and 5/16" barbed outlets. Money-back guarantee -customer satisfaction is our #1 policy! If you are not satisfied with our product or if you experience any issues, brass and stainless steel material, Please contact us. Run with 2 lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines.
BrandSilkyway #ad

5. Suteck

#ad

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

#ad
Suteck #ad - Made of aluminum, brass and stainless steel material, it is extremely durable. There is a 2-point screw hole on the top for easy installation to other equipment.

Gas manifold, a built-in check valve protects your shunt and prevents gas back flow. 5/16" barbed inlet and 5/16" barbed outlets. Run multiple lines from one co2 source. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi.
BrandSuteck #ad
Height3.86 Inches
Length5.6 Inches
Weight0.8 Pounds
Width1.4 Inches
Part NumberFPQ839

6. Silkyway

#ad

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

#ad
Silkyway #ad - 5/16" threaded ports barbed inlet and 5/16" barbed outlets. Money-back guarantee -customer satisfaction is our #1 policy! If you are not satisfied with our product or if you experience any issues, Please contact us.

Each line has its own shutoff valve. Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. Made of prime aluminum, brass and stainless steel material, which is extremely durable. Gas manifold, machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow.

Designed with a 2-point screw hole on the top for easy installation to other equipment. Chrome plated valves with spring loaded Ball check valve. Run with 2 lines from one CO2 source. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg. The distributor allows you to split the gas supply into multiple lines.
BrandSilkyway #ad

7. YB YaeBrew

#ad

Air Distributor CO2 Manifold, Splitter 5/16" Barb Fittings 2 Way, Beer Gas Distributor, YaeBrew Gas Manifold

#ad
YB YaeBrew #ad - High quality 100% Brand New;. With check valves built into the beer coupler which won't make check valve failure; this built-in check valve in the beer coupler can eliminates the need for the gas manifold check valve, preventing beer system failure; with Individual shut off;.

Material: aluminum body; Barbed inlets / outlets: 5/16". 2-way co2 splitter manifold for beer kegs/lines, to maintain carbonation and pressure for draft beer from keg to faucet; can be used for breweries and commercial businesses;. Before shipment, the manifold is Leak-checked and cleaned to ensure leak-free service and no oil residues.
BrandYB YaeBrew #ad

8. MRbrew

#ad

CO2 Gas Distributor, 2-Way Air Distributor with Integrated Check Valves & Hose Clamps, MRbrew Gas Manifold, 5/16'' Barb Fitting Beer Kegerator Splitter

#ad
MRbrew #ad - Indispensable tool to build a strong keg systemthis air distributor can let you carbonate 2 kegs at the exact same pressure setting with a regulator. Low cost connecting extensionthe gas manifold is designed with two 5/16’’ barb fitting outputs, no need of high cost multi-connection regulator! Anti-backflow & excellent sealingthis co2 distributor has a shut off valve on 2 outputs individually, which allows splitting co2 gas line from 1 output to 2 outputs to brewing keg, can control each outputs individually.

It is made of quality aluminum, which is strongly against rust and corrosion, easy to clean and will last for long. Each output has a built-in check valve, which will not get backflow into the gas line if hooking up an over- or under-pressurized keg.

But it can not carbonate different beers simultaneously that require different carbonation pressures setting! 100% lifelong issues solving for youeach mrbrew co2 manifold is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!. The sealant is strong on the connection to prevent leaks perfectly. Quality anti-rust materialthe beer kegerator splitter is seriously assembled with excellent quality parts and has great quality control.
BrandMRbrew #ad

9. HBYOB

#ad

5/16" Stainless Steel Tee Barb 3 Way Co2 Splitter T

#ad
HBYOB #ad - 5/16" barb on all sides. 3-way splitter for More than one Keg. Stainless Steel "T". No need for more than one Co2 regulator. For homebrewing and Draft Beer Systems.
BrandHBYOB #ad
Part Number8541955912
Model8541955912